新入荷 再入荷

Selected Airbrush: Nozzle Diameter: 0.01 inch (0.3 mm), Maximum Air Output: 2.2 gal (8 L) / min, Air Pressure: 0.13 MPa (19 Psi) - 0.17 MPa (25 Psi). The airbrush has excellent atomizing effect, allowing the paint to be sprayed in a fine mist and evenly In addition, you can adjust the amount of spray with the needle stopper on the back of the handpiece, so you can adjust the amount of spray according to your needs and needs. Stylish and durable airbrush with an easy grip Unique Design - Dedicated to Batteries: The battery can be removed and recharged. Comes with a spare battery, so you can use it while alternating charging, so you can work for a long time. The USB cable used to charge is a Type-C type, so it is highly versatile, and it can also be used to charge your smartphone (*Type-C compatible). In addition, the battery is equipped with a constant pressure motherboard. The air pressure is stabilized, so it can be applied evenly without any worries. In addition to the spraying effect, it also has overload protection, so there is no need to worry about overcharging. Convenient Joints: Comes with an air hose joint and an air valve joint for a wide variety of uses. You can also connect it to your hose, but please be careful with the size. Screw Standards: Unit connection screw standard: M7 x 0.5. Included air valve joint connection screw standard: G1/8. (Easy operation and fun to work) 1. Attach the handpiece to the main body and insert paint. 2. Turn on the power and switch on. Ready to use. Compared to a brush or spray can, it is easy to operate and adjust the amount of spray. It is sure to make work more fun. (Various uses) The spray can be applied without any mess, so it can be used in a variety of ways. If you use it for plastic models, paintings, and DYI works you may be more than expected. Please note that if the paint has a high concentration, please add a lot of thinner solution when diluting. The darker the clog becomes easier.